Introduction:
The door seal, also known as the joint de hublot, is a crucial component of your washing machine. It ensures that water does not leak out during the wash cycle and helps maintain the efficiency of your machine. Over time, the door seal may wear out or develop cracks, leading to leaks and potentially damaging your machine. In this article, we will provide a comprehensive guide on how to replace the door seal of your washing machine, specifically focusing on the changer joint hublot lave linge.
Step 1: Décollez le joint du côté du tambour
To begin the process of replacing the door seal, you will first need to peel off the old seal from the drum side. This can be done by gently pulling the seal away from the edge of the drum. Use your fingers or a flat-headed screwdriver to carefully pry the seal away from the drum's edge, making sure not to damage the drum or the seal in the process.
Step 2: Écartez le joint en introduisant vos doigts ou un tournevis à large tête plate
Once you have detached the seal from the drum side, you will need to spread the seal to create enough space to remove it completely. You can do this by inserting your fingers or a wide flat-headed screwdriver between the seal and the edge of the door. Gently pry the seal away from the door, working your way around the entire circumference of the door.
Step 3: Remove the old seal
After you have spread the seal and created enough space, carefully pull the old seal away from the door. Make sure to take note of how the old seal is installed so that you can replicate the process when installing the new seal. Inspect the old seal for any signs of damage or wear, which may have led to the need for replacement.
Step 4: Clean the door and drum
Before installing the new door seal, it is essential to clean the door and drum thoroughly. Use a mild detergent and warm water to remove any dirt, grime, or residue that may have accumulated. Ensure that the surfaces are dry before proceeding with the installation of the new seal.
Step 5: Install the new door seal
Carefully align the new door seal with the edge of the door, ensuring that it sits securely in place. Press the seal firmly against the door, making sure it is evenly positioned around the entire circumference. Take your time to ensure that the seal is properly installed to prevent any leaks or issues during use.
Step 6: Test the washing machine
Once the new door seal is installed, close the door of the washing machine and run a test cycle to ensure that the seal is functioning correctly. Check for any leaks or unusual sounds during the wash cycle, which may indicate that the seal needs to be readjusted or replaced.
current url：https://bvqcjf.d698y.com/blog/changer-joint-hublot-lave-linge-91590